3M Scotch-Brite (TM) non-woven roll SE-RL 1270 mm x 25 m A CRS 7000068183

The Scotch-Brite (TM) non-woven roller PS-RL is an inexpensive alternative for smoothing, matting and cleaning various surfaces. This non-woven material can also be used for roughening painted surfaces, removing wood fibers or light deburring. The Scotch-Brite (TM) surface preparation roller can be used for effective deburring, blending and finishing of numerous surfaces. Our versatile surface preparation rolls can also be used for light sanding. These all-purpose surface preparation rollers offer all the benefits of Scotch-Brite (TM) products such as non-woven abrasive technology and even stock removal. They are available with aluminum oxide or silicon carbide abrasive and in a wide range of grits from superfine (SFN) to coarse (CRS). The superfine grit removes less aggressively and produces a fine finish, while the coarse grit removes more aggressively and produces a coarser finish. A suitable grit is available for all tasks. Scotch-Brite (TM) abrasives are unique surface finishing products that utilize non-woven technology. The abrasives penetrate the non-woven fibers with the help of synthetic resin. This creates an open structure of the nonwoven. Excess material can escape through the spaces between the fibers so that the mineral is not worn down by splinters. As a result, the cutting sharpness of the mineral is maintained for longer, the removal rate is improved and the service life of the abrasive is extended. The resilient nature of the fibers is very suitable for contours and reacts to the smallest protrusions on the surface. Thanks to their reactivity, the fibers effectively remove unwanted burrs, dirt and impurities without damaging the workpiece. You get an even and smooth surface finish - workpiece after workpiece.