RAU group workbench 2700x2340x840 mm Series 400-EA

Solid beech cover plate (25 mm thick). Fully wired and earthed, in accordance with standards: DIN VDE 0113-1 - final inspection in accordance with the Machinery Directive, DIN EN 60529 (VDE 0470-1) - protection classes through housing (IP code) - IP40, DIN EN 61140 (VDE 0140-1) - protection class I.Media attachment including connection cable 09-AL400V (includes 5-pole connection cable with plug) as well as preparation for supplying air and data cable.Connection cable: cable cross-section per core 2.5 m²; total load up to 10.5 kW.All 6 sides of the media top unit are equipped as follows (from left to right):1x built-in module 09-EM100-400V:Module with three-phase socket outlet with hinged cover 400V / 16A.1xInstallation module 09-EM100-LUFT: Module with compressed air quick coupling G1/4, NW 7.2 brass.1xInstallation module 09-EM100: Module without equipment as dummy cover.1xInstallation module 09-EM200-230V-2DE: Module with 2x socket outlet with hinged cover 230V / 16A (for country/plug: Germany / type F).Installation modules in accordance with the directives: 2001-95-EC - General Product Safety, 2006-42-EC Machinery Directive, 2011-65-EU - Restriction of the use of hazardous substances in electrical and electronic equipment, 2011-35-EU - Provision of electrical equipment within certain voltage limits.Note: Please note that the media attachment must not be opened and each side of the media attachment is subject to a power limit of max. 16A.Solid beech worktop, 40 mm thick.6-Corner worktop (2-part, including worktop-plate connector and fittings), edge length 1350 mm, corner dimensions 2700x2340 mm. Beech frame with finger-joint gluing. Front edge with radius. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from tree to worktop) with raw material from sustainable and regional forestry.System substructure, H800 mm.12-leg frame with six pairs of frame legs made of C-profile steel (70x50x2 mm) incl. depth bracing (top and bottom). Frame legs with wide support surface (120 mm) at the top and with floor anchoring option at the bottom thanks to perforated foot plates.