3M Trizact (TM) Finesse-it (TM) film roll 464LA 20 mm A3 7100041006

Use the 3M (TM) Trizact (TM) Finesse-it (TM) Film Disc 464LA with a unique surface topography with channels that channel abrasive particles away from the disc, reducing the likelihood of clogging and extending disc life. Our 464LA disc is available in different grit sizes. The 3M (TM) Trizact (TM) Finesse-it (TM) Film Disc 464LA is used in the automotive or logistics industry. It removes irregularities and surface defects from painted surfaces before buffing. Our 464LA discs are sharp enough to remove defects, but soft enough not to remove the orange peel on the paint. The silicon carbide mineral on our wheel is very hard and breaks easily. This exposes new sharp edges that cut very quickly and produce a professional quality finish. Silicon carbide abrasives are typically used for low pressure applications. We have designed the 464LA discs for repairing defects in clear coats, paint preparation, coating and corrosion removal as well as surface preparation for clear coat, top coat and paint. The discs are available in different grit sizes. This allows users to make the right choice for their project. This disc can be used with dust inclusion sanders as well as random orbital sanders. The 3M Trizact abrasives make jobs like simple sizing and finishing enjoyable again by reducing processing steps, increasing throughput and delivering a consistent finish. 3M microreplication technology offers enormous advantages. During microreplication, small three-dimensional pyramid-like structures are attached to a substrate. The pyramids contain layers of a mineral that break off after repeated use, exposing fresh mineral. This mineral exposure cycle ensures that the abrasive remains sharp. The continuously sharp removal rate ensures that the abrasive needs to be replaced less often. This increases throughput and productivity. As the mineral is evenly distributed over the abrasive surface, contact with the workpiece is uniform and not random, so the removal rate is ultimately more even. 3M Trizact abrasives are particularly suitable for projects with stringent technical requirements, such as medical implants, surgical instruments and automotive transmission components, providing consistent results workpiece after workpiece.