3M Perforated Lift'n Stick Masking Tape Silver 50.8 mm x 10 m 7100145503

The 3M (TM) Perforated Lift'n Stick Masking Tape is equipped with a solid strip on one side that can be gently slid under rubber seals and lifts them slightly off the bodywork. This adhesive tape ensures that the paint flows under the rubber seals while their outside is covered. This means that the rubber seals do not have to be removed or replaced during professional painting work, nor is it necessary to touch up the edges of the paint. Thanks to the perforations, you can tear off the tape by hand and save time. Faster, more cost-effective rubber seal masking The 3M (TM) Perforated Lift'n Stick Masking Tape is designed for professionals who want to achieve a clean, uniform appearance when painting around flexible body moldings when repairing vehicle bodies. The tape allows for a quick, professional paint job without sharp paint edges and without the extra time spent removing, replacing or cleaning existing sealing rubbers. The tape is suitable for masking directly bonded windscreens and rear windows, side body moldings, inset door handles and rear lights as well as sidelight and headlight units. The backing material has perforations that do not weaken the tape during masking, but allow painters to tear off the tape by hand. This eliminates the tedious search for cutting tools to tear it off. The 3M (TM) Perforated Lift'n Stick Masking Tape has a solid strip on one side that can be quickly and easily slid between sealing rubbers and body surfaces. The tape is available in several widths for a wide range of masking work on vehicles. A solid polymer backing material remains stable even when the rubber seals are lifted, providing reliable coverage that protects the outside of the rubber seal from paint splashes. A translucent backing on the adhesive side of the tape can be easily removed without leaving any residue for precise placement. As soon as painters spray the paint over the cover, it flows into the small gaps between the molded parts and the paint surface. When the masking tape is removed, the sealing rubbers simply lay back onto the fresh paint - no visible paint edges and no extra time spent removing paint edges from rubber strips after painting. And best of all - you can mask the rubber strips in a very short time without having to remove or replace existing rubber seals, saving labor and material.