3M Cushion-Mount (TM) plate mounting tape Pink 1372 mm x 23 m 0.5 mm 7100137064

Use the 3M (TM) Cushion-Mount (TM) Plus plate mounting tape L1920 to mount your photopolymer plates on printing cylinders. Our 0.51 mm thick, pink double-sided high-performance adhesive tape has micro-channels. It allows for easy and clean removal of the plate, even when ink smudges are present, and is used for high-speed printing with predominantly halftone/halftone designs. 3M (TM) Cushion-Mount (TM) Plus plate mounting tape L1920 is used for easy mounting of flexographic printing plates on cylinders or sleeves. Thanks to the new adhesive technology used on the cliché side, the cliché can be removed with less effort, even if the flexographic printing plates are dirty (ink residue). The L1920 adhesive tape enables high quality in high-speed combination printing when halftone and halftone elements predominate. Our Easy Mount protective film creates micro-channels on both sides of the adhesive. The diamond-shaped grid pattern creates a continuous and permanent network of micro-channels in the adhesive film, which allows air to escape between the adhesive tape and the cylinder/sleeve and between the adhesive tape and the cliché. The adhesive on the side with the protective film (facing the cliché) was specially developed for photopolymer plates. It has a high holding force during the printing process and enables the printing plate to be removed easily afterwards. The adhesive on the side (facing the cylinder) without protective film has been specially developed for printing cylinders/sleeves. It ensures that the adhesive tape is easy to apply during assembly and can be removed cleanly during disassembly.