3M Cushion-Mount (TM) plate mounting tape L1820 Blue 1372 mm x 23 m 7100136279

Use the 3M (TM) Cushion-Mount (TM) Plus plate mounting tape L1820 to mount your photopolymer plates on printing cylinders. Our 0.51 mm thick, blue double-sided high-performance adhesive tape has micro-channels. It enables easy and clean removal of the cliché, even if ink stains are present, and is used for clichés in combination printing with mainly full-tone elements. 3M (TM) Cushion-Mount (TM) Plus plate mounting tape L1820 is used for easy mounting of flexographic printing plates on cylinders or sleeves. Thanks to the new adhesive technology used on the cliché side, the cliché can be removed with less effort, even if the flexographic printing plates are dirty (ink residue). The L1820 adhesive tape enables high-quality printing results with a combination of solid and halftone motifs with predominantly solid areas. Our Easy Mount protective film creates micro-channels on both sides of the adhesive. The diamond-shaped grid pattern creates a continuous and permanent network of micro-channels in the adhesive film, which allows air to escape between the adhesive tape and cylinder/sleeve and between the adhesive tape and cliché. The adhesive on the side with the protective film (facing the cliché) has been specially developed for photopolymer plates. It has a high holding force during the printing process and enables the printing plate to be removed easily afterwards. The adhesive on the side (facing the cylinder) without protective film has been specially developed for printing cylinders/sleeves. It ensures that the adhesive tape is easy to apply during assembly and can be removed cleanly during disassembly.