3M Cushion-Mount (TM) plate mounting tape L1520 Violet 1372 mm x 23 m 7100136285

Use the 3M (TM) Cushion-Mount (TM) Plus plate mounting tape L1520 to mount your photopolymer plates on printing cylinders. Our 0.51 mm thick, purple double-sided plate mounting tape has micro-channels that prevent the formation of air bubbles. It enables the cliché to be removed easily and cleanly, even if there are impurities on the clichés. It is used in combination printing. 3M (TM) Cushion-Mount (TM) Plus plate mounting tape L1520 is used for easy mounting of flexographic printing plates on cylinders or sleeves. Thanks to the new adhesive technology used on the cliché side, the cliché can be removed with less effort, even if the flexographic printing plates are dirty (ink residue). The L1520 adhesive tape enables high quality in high-speed combination printing with fine negative lettering and extended color space. Our Easy Mount protective film creates micro-channels on both sides of the adhesive. The diamond-shaped grid pattern creates a continuous and permanent network of micro-channels in the adhesive film, allowing air to escape between the adhesive tape and cylinder/sleeve and between the adhesive tape and cliché. The adhesive on the side with the protective film (facing the cliché) was specially developed for photopolymer plates. It has a high holding force during the printing process and enables the printing plate to be removed easily afterwards. The adhesive on the side (facing the cylinder) without protective film has been specially developed for printing cylinders/sleeves. It ensures that the adhesive tape is easy to apply during assembly and can be removed cleanly during disassembly.